A100 The Model A100, plug resistant orifice, has been used in power plants around the world since 1971, and has proven its reliability in the most demanding of services. It is rated for 3675 psig @1000F, OR 2625 psig @ 1050F.It was designed to prevent inadvertent water induction into turbine cylinders by replacing failure- prone steam traps. >> Learn More

B400 Designing a high pressure drop system is relatively easy: a small throttling valve and/or an orifice plate in the line will do the job nicely... unless the pressure drop is too high, corrosion products are in the stream, or there is flashing. Then the job gets tough: How do you reduce the probability of noise, vibration, plugging, and erosion? Meet the B400 PLUG RESISTANT ORIFICE. >> Learn More

C500 The C500SW diffuser is the socket weld version of CU Services LLC's family of high-pressure diffusers. It can be used individually or as a system of two or more units placed in series to mitigate the damage that is caused by the rapid reduction of high pressure of a flowing hot condensate stream. >> Learn More

C600 The C600FL shown is the 6" plate version of the socket-welded C500 family of diffuser orifices, and serves the same purposes described for the C500. The plate has an integral ring holder which has octagonal-type rim (can also be furnished with an oval -type rim) to fit RTJ grooved flanges. With this design a highly reliable sealing system is achieved guaranteeing many years of trouble free operation >> Learn More

C700 The C700BW diffuser is the butt-weld version of the family of diffuser devices. It can be used individually or as a system of two or more units placed in series to mitigate the damage that is caused by the rapid reduction of high pressure of a flowing hot condensate stream. >> Learn More

D800 Venting high pressure gas or steam to atmosphere during a plant startup or shutdown is a common practice. In addition to generating unacceptable noise levels, the vent valves are subjected to severe pressure drops. Use of a Model D800 High Pressure Vent Diffuser will both greatly reduce the atmospheric noise and create a back pressure on the vent valve further reducing the generated noise and reducing the wear and tear on the valve. >> Learn More

---

CU Services LLC | 725 Parkview Cir. | Elk Grove Vlg, IL  60007
Phone: 847.439.2303

Copyright © 1971 - 2004 CU Services LLC & Thermal Analysis Systems Co. All rights reserved.